Another, more economical method, though without any guarantee on our part, is to obtain a balance by using an ordinary laminate of the same thickness note that OBERFLEX type panel thickness may vary depending on the wood species.? If the glue is applied with the aid of a serrated trowel, the direction of application on substrate and decorative laminate should be at right angles to each other.? In the case of porous or extremely absorbant surfaces, several coats of adhesive must be applied. Prior to gluing, they have to be perfectly conditioned. Substrates The panels can be applied to all kinds of base material having a perfectly flat and thoroughly clean surface, such as particle board, MDF, etc, with the exception of solid wood.? Technical assistance Our technical department is at your disposal to help and advise in each particular case.
|License:||For Personal Use Only|
|iPhone 5, 5S resolutions||640×1136|
|iPhone 6, 6S resolutions||750×1334|
|iPhone 7, 7 Plus, 8, 8 Plus resolutions||1080×1920|
|Android Mobiles HD resolutions||360×640, 540×960, 720×1280|
|Android Mobiles Full HD resolutions||1080×1920|
|Mobiles HD resolutions||480×800, 768×1280|
|Mobiles QHD, iPhone X resolutions||1440×2560|
|HD resolutions||1280×720, 1366×768, 1600×900, 1920×1080, 2560×1440, Original|
The best method of conditioning is to store substrates and panels for a period of 8 to 10 days in the same room zegrano the atmospheric conditions are the closest possible to those of the site where they are to be used.
The surface to be glued must be sound, thoroughly dry, clean and free of dust, wood chips and oil. They are sensitive to ambient conditions temperature and humidity.
Chic & Pop – Oberflex
Apply a regular, symmetrical coat of glue to the two sides to be bonded, use an appropriate tool serrated trowel, gluing roller, short-bristle brush, spraying gun. It is recommended to store the panels in noi atmospherically stabilized room to avoid extreme fluctuations of moisture. Sawing – milling – drilling: Strong pressure on the roller is recommended.
It is possible also to store them vertically in racks specially designed to avoid sagging.?
Flat storage is the best. Gluing The surface to be glued must be sound, thoroughly dry, clean and free of dust, wood chips and oil. Above that temperature, there would be risks of creating tension harmful to effective adhesion.
Hand pressing Only a roller can achieve results comparable to a press. Description of the different neoprene adhesives to use: Another, more economical method, though without any guarantee on our part, is to obtain a balance by using an ordinary laminate of the same thickness note that OBERFLEX type panel thickness may vary depending on the wood species.? We recommend the Pattex roller most suitable for this task.
Application of the adhesive. Bonding on cement or gips substrate is to be avoided. Installation guidelines The panels are manufactured and glued in the same manner and on the same substrates as conventional laminates. This is especially important in the case of overheated rooms without humidity control.
Bodies of whatever type are never inert. An overly brief evaporation time creates a risk of incomplete evaporation of the solvent weakening of the gluing. Gluing to metal requires careful preparation of the surface, particular attention being paid to thorough degreasing with a strong solvent trichlorethylene, etc In the case of porous or extremely absorbant surfaces, several coats of adhesive must be applied. Gluing with the use of a press is the safest method.
Fabrication Sawing – milling – drilling: After evaporation of the solvent, the glue film must be clearly visible and sufficiently thick.
Cleaning off glue residue Vinyl glue stains white glue are water-soluble and may be easily removed. In the case of fire-retardent grade panels, which have a different underlay and are applied to different types of substrates themselves fireproof, we recommend contacting the glue manufacturer to ascertain the product best suited in each case.
An overly long time leads to poor adhesion of the two glue films. Stains from neoprene or formol urea glues with separate hardener must be removed zebrqno. Dry heat is an advantage, cold delays evaporation of the solvents, while overly high humidity can cause harmful condensation. Store the panels face to face. Certain glues recommended for use with our standard grade panels are in fact unsuitable for fire-retardent grade sheets. However, the only criteria we take into account and guarantee is the intrinsic quality of our products.
Rolling should be in both directions starting from the centre and working towards the outside, paying particular attention to the edges.?